manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 79 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 79

1-38

BEFORE USING THE MACHINE

Contents

TRAY SETTINGS OF TRAY 5 (A3 LARGE 
CAPACITY TRAY)

LOADING PAPER

Up to 3000 sheets of 8-1/2" x 11" to 11" x 17" (B5 to A3) size paper (20 lbs. (80 

g

/m

2

)) can be loaded in the large 

capacity tray (MX-LCX3N).
For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "

Paper Tray 

Settings

" (page 7-13) in the System Settings.

1

Press the operation button.

The operation button indicator will blink and the tray's paper 
table will descend to the paper loading position. Wait until the 
operation button indicator turns off.

Do not remove the tray before the indicator turns off. Attempting to pull the tray out when the indicator is blinking or 
solidly lit may damage the tray.

2

Pull out the paper tray.

Gently pull the tray out until it stops.

3

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, 
multiple sheets may feed at once and cause a misfeed.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments