manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 278 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 278

2-118

COPIER

Contents

4

Set the number of copies (number of 
sets) with the numeric keys.

If you will copy multiple originals using the document glass, 
switch to sort mode after this step.

☞

Sort mode

 (page 2-34)

Up to 999 copies (sets) can be set.

If an incorrect number of copies is set...

Press the [CLEAR] key (

) and then enter the correct number.

5

Press the [START] key.

One set of copies is printed.
If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all 
pages have been scanned and then touch the [Read-End] key. One set of copies will be printed.

To cancel copying...

Press the [STOP] key (

).

6

Check the printed set of copies. If the 
copies are acceptable, touch the [End] 
key. If you need to change the settings, 
touch the [Change] key.

When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.

To cancel copying...

Press the [STOP] key (

).

Plain

7

8½ 11

Special Modes

2-Sided Copy

End

Change

Press [End] to continue.

To make a proof copy again, press

[Start].

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments