manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 97 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 97

1-56

BEFORE USING THE MACHINE

Contents

FINISHER (3 TRAYS)

The 

finisher (3 trays) is 

equipped with the offset function, which offsets each set of output from the previous set, and the 

staple sort function, which staples each set of output. 
A punch module can also be installed to punch holes in output.

PART NAMES

(1)

Stapler compiler

This temporarily stacks paper to be stapled.

(2)

Middle tray

Open this cover to remove paper jams in the stapler 
compiler.

(3)

Output trays (upper tray, middle tray*, lower tray)

Stapled and offset output is delivered to these trays.
The trays are slidable. For large-size output (11" x 17", 
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 13-1/2", 
8-1/2" x 13-2/5", A3, B4 and 8K sizes), extend the tray.

(4)

Right front cover

Open this cover to remove a paper misfeed.

(5)

Left front cover

Open this cover to replace the staple cartridge or remove 
a staple jam.

* Stapled and offset copies cannot be delivered to the middle 

tray.

SUPPLIES

The finisher (3 trays) require the following staple cartridge:

Staple cartridge (approx. 5000 staples x 3 cartridges) 
MX-SC10

(1)

(3)

(2)

(5)

(4)

• Do not place heavy objects on the finisher (3 trays) or press down on the finisher (3 trays).

• Use caution when you turn on the power and when printing is taking place, as the output tray may move up and down.

• A finisher (3 trays) cannot be installed simultaneously with a saddle stitch finisher or a finisher.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments