Sharp MX 3501N - Color Laser - Copier User Manual Download Page 839

Page: 839 / 843

Place the box on a flat surface.

Place a sheet of newspaper on the surface before placing the
box.

Do not point the holes down as used toner will spill out.

Remove the seals around the holes.

Grasp the edge of each seal and pull it out toward you.

There are 5 seals. Remove all of the seals.

Plug the holes.

Grasp the edge of each black seal and insert it into a hole in the
box to plug the hole.

• There are 5 seals. Plug all of the holes.

• Do not discard the waste toner box. Place it in a plastic bag and keep it until your service technician comes to

perform maintenance. Your service technician will collect the waste toner box.

Install the new waste toner box.

Insert the box from above at a slant. (The direction opposite to
when you removed it.)

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, User Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands