Sharp MX 3501N - Color Laser - Copier User Manual Download Page 822

Page: 822 / 843

Insert a new staple cartridge into the
staple case.

Push the staple cartridge in until it clicks into place.

Do not remove the seal from the cartridge before inserting the cartridge into the case.

Pull the seal that holds the staples
straight out.

Replace the staple case.

Push the staple case in until it clicks into place.

Push the stapler section back in.

Push the stapler section back in until it locks into its original
position.

Close the front cover.

Make a test print or copy in staple sort mode to verify that stapling takes place correctly.

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, User Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands