Sharp MX 3501N - Color Laser - Copier User Manual Download Page 824

Page: 824 / 843

Remove the misfed paper.

Be careful not to tear the paper during removal.

Close the saddle stitch section cover.

Pull out the stapler section.

Pull out until the stapler section until it stops.

Turn roller rotating knob A in the
direction of the arrow to move the staple
unit out to the front.

Turn the roller rotating knob until the triangle mark is aligned
with the indicator.

Remove the staple case.

Raise the lever at the front end of the
staple case and remove the jammed
staple.

Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.

Roller rotating knob A

Staple unit

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, User Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands