Sharp MX 3501N - Color Laser - Copier, User Manual

Page: 674 / 843

68
11
Press the [COLOR START] key ( )
or the [BLACK & WHITE START] key
(
).
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time. If you are using the sort function or other
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
• To make pamphlet copies of a book or other bound original, use the book copy function.
• When the pamphlet copy function is selected, 2-sided copying mode is automatically selected. When settings are selected
that prevent 2-sided copying, the pamphlet copy function cannot be used.
• Scan the originals in order from the first page to the last page. The order of copying will be automatically adjusted by the
machine. Four original pages will be copied onto each sheet of paper. Blank pages may be automatically produced at the
end depending on the number of original pages.
• When a saddle stitch finisher is installed, saddle stitch can be used. When pamphlet copy is used in combination with the
saddle stitch function and the number of originals is greater than the number of sheets that can be stapled, a message will
appear showing the [Cancel] key, the [Continue] key, and the [Divide] key. To cancel the job, touch the [Cancel] key. To
make pamphlet copies without stapling, touch the [Continue] key. To divide the pages into sets that can be stapled, touch
the [Divide] key.
If you selected settings for adding a cover, it will not be possible to select "Divide". You can either continue pamphlet
copying without stapling, or cancel the job.
To cancel pamphlet copy...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Automatic Saddle Stitch
When a saddle stitch finisher is installed, this setting can be enabled to have saddle stitch take place automatically when the
pamphlet copy function is selected.
or