Sharp MX 3501N - Color Laser - Copier, User Manual

Page: 38 / 843

36
10
Select the destination addresses.
(1) Touch the keys of the desired destinations.
The selected destinations are highlighted and stored in
the group key.
(2) Touch the [OK] key.
• Touch the [OK] key. "Registration is completed." will appear.
• Keys that cannot be stored as group keys are grayed out to prevent selection.
• To directly enter an address or check the selected addresses, see " Direct entry " (page 37) and " Checking
addresses " (page 37).
• Up to 500 addresses can be programmed.
If an incorrect address is selected...
Touch the address once again so that it is not highlighted. This removes it from the group being stored.
11
Check the key name.
If you need to change the name that appears in the key, touch
the [Key Name] key and enter the correct name (maximum of
18 characters).
The characters appearing next to the [Key Name] key will be displayed in the group key. Initially the first 18 characters
of the group name entered in step 5 appear.
12
Touch the [Exit] key.
To store another group...
Touch the [Next] key and repeat the procedure from step 5.
• A total of 999 one-touch keys and group keys can be stored.
• It will not be possible to store a group if this has been prohibited using " Disable Registering Destination from Operation
Panel " (page 106) in the system settings (administrator).
Direct Address / Group
Select address.
OK
Direct Entry
Address Review
Sort Address
1/2
UVWXYZ OPQRST JKLMN EFGHI ABCD Frequent Use
EEE EEE
CCC CCC
AAA AAA
FFF FFF
DDD DDD
BBB BBB
0
(2) (1)
Direct Address / Group
Search Number
Group Name
Initial
Next Exit
Index Address
Key Name
User 1
3 Addresses
B
BBB BBB
001
BBB BBB
Registration is completed.
Direct Address / Group
Search Number
Group Name
Initial
Next
Index Address
Key Name
3 Addresses
001 Registration is completed.
Exit
User 1
B
BBB BBB
BBB BBB