Sharp MX 3501N - Color Laser - Copier, User Manual

Page: 113 / 843

111
I-Fax Send Settings
I-Fax Send Settings are described below.
Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Send Settings] key, and configure the
settings.
I-Fax Reception Report On/Off
Setting
This setting is used to request a reception report when
an Internet fax is sent.
The reception report is returned to the sender address
stored in "I-Fax Own Name and Address Set".
To enable this setting, select the checkbox
and
touch the [OK] key.
I-Fax Reception Report Request
Timeout Setting
The duration of time that the machine will wait for a
reception report from the destination machine can be set
by any number from 1 minute to 240 hours.
Select the "Hour" key and "Minute" key, specify the
values with the
keys, and touch the [OK] key.
(To make the number change quickly, keep your finger
on the
or key.)
Number of Resend Times at
Reception Error
When an error message is received from an Internet fax
destination, the number to resend can be set from 0 to
15.
Specify the desired number with the
keys and
touch the [OK] key. (To make the number change
quickly, keep your finger on the
or key.)
Maximum Size of E-mail
Attachments (E-mail)
To prevent the transmission of excessively large image
files by Internet fax, a file size limit can be set from 1 MB
to 10 MB in increments of 1 MB.
If the size of the image file created by scanning the
original exceeds the limit, the image file is discarded.
To set a limit, make sure that the [Unlimited] key is not
selected
, specify the limit with the keys,
and touch the [OK] key. (To make the number change
quickly, keep your finger on the
or key.)
If you do not want to set a limit, select the [Unlimited] key
and touch the [OK] key.
Rotation Sending Setting
When transmitting an image that is one of the following
sizes, this function rotates the image counterclockwise
90 degrees.
• 8-1/2" x 11", 5-1/2" x 8-1/2"R, A4, B5R, A5R, 16K
To use this setting, select the checkboxes of the
desired sizes and touch the [OK] key.
Printing Page Number at Receiver
When the transmitted image is printed by the receiving
machine, the page number can be added to the top of
each printed page.
To enable this setting, select the checkbox
and
touch the [OK] key.
This setting can only be configured when " I-Fax
Reception Report On/Off Setting " is enabled.
This setting can only be configured when " I-Fax
Reception Report On/Off Setting " is enabled.
This setting is linked to " Maximum Size of E-mail
Attachments (E-mail) " (page 108) in the Scan
Settings.
8-1/2"x11"R and A4R size images are not rotated.