Sharp MX 3501N - Color Laser - Copier User Manual Download Page 833

Page: 833 / 843

Clean the laser unit.

(1) Point the cleaner down and slowly insert

the tool into the hole that you wish to clean.

Be sure to point the cleaner down.

(2) Insert the cleaning tool all the way into the

hole and then pull it back out.

Pull the cleaning tool out until you feel the tip of the tool
leave the cleaning surface of the laser unit.

(3) Repeat step (2) two or three times and then

remove the cleaning tool.

Repeat step 8 to clean all holes in the
laser unit (4 holes).

There are a total of 4 holes to be cleaned in the laser unit,
including the hole cleaned in step 8. Clean all holes.

Push the waste toner box into the
machine.

Push the waste toner box firmly in until it clicks into place.

Holes

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, User Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands