Samsung OfficeServ SMT-I5220, User Manual

Page: 123 / 626

64
• Redial the new passcode. If successful, you will hear two beeps. Four beeps
indicate an incorrect code to confirm, reenter the code again.
• Press
Transfer
to store the new passcode.
SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes (see
Answering Intercom Calls
under
Intercom Calls
for descriptions).
• While on-hook, press
Transfer
and then dial
103
.
• Dial
0
for Ringing,
1
for Auto Answer or
2
for Voice Announce.
• Press
Transfer
to store your selection.
NOTE: When your keyset is programmed for Voice Announce and you have For-
ward No Answer (FNA) turned on, you must answer screened transfers by pressing
the
OK
button before your FNA timer expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
• While on-hook, press
Transfer
and then dial
110
.
• Dial
15
to access
AUTO ANS CO
.
• Press the
Volume Up [+]
or
Volume Down [-]
key to change status.
• Press
Transfer
to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line button, route button or a flashing
Call
but-
ton will automatically put your call on hold and connect you to the next call. This
feature can be turned on or off at your keyset.
• With the handset on-hook, press
Transfer
and then dial
110
.
• Dial
001
to turn Automatic Hold on or
000
to turn it off.
• Press
Transfer
to store your selection.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode, press the
Speaker
button to answer and
Speaker
button to
release calls.
• With the handset on-hook, press
Transfer
and then dial
110
.
• Dial
021
to use the headset or
020
to use the handset.
• Press
Transfer
to store your selection.
Your keyset is equipped with a
Headset
button. Pressing this button while the
indicator is off will cause the keyset to enter headset mode and the button indica-
65
tor to be lit solid to indicate this. Pressing the button while the button indicator is
lit solid will cause the keyset to return to handset mode and the button indicator
will go off.
NOTE: If you need to switch between headset mode and handset mode (or speak-
er phone) during a conversation, you will need to put the call on hold first.
HOT KEYPAD
On your phone system your keyset’s keypad can be made “live” or “hot” so that it is
not necessary to lift the handset or press the
Speaker
button before you begin di-
aling. Calls can be made and features activated by simply dialing the C.O. line num-
ber, trunk group access code, intercom number or feature access code.
• With the handset on-hook, press
Transfer
and then dial
110
.
• Dial
031
to turn the Hot Keypad on or
030
to turn it off.
• Press
Transfer
to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.
• While on-hook, press
Transfer
and then dial
110
.
• Dial
040
to turn tones off or
041
to turn tones on.
• Press
Transfer
to store your selection.
• Additional ring tones can be selected from the
Menu
,
Phone
,
Sound
,
Keytone
option.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:
• With the handset on-hook, press
Transfer
and then dial
110
.
• Dial
051
to turn this feature on or
050
to turn it off.
• Press
Transfer
to store your selection.
—
OR
—
• Press the
Menu
button, scroll to
Phone
, press
OK
.
• Scroll to
Sound
and press
OK
, scroll to
Keytone
, and press
OK
.
• Using the
Navigation
button scroll to
Select New Ring Tone
, press
Save
soft
button.
Home Page