Samsung OfficeServ SMT-I5220, User Manual

Page: 200 / 626

4
PREPARATION
CHECK THE CONTENTS OF THE BOX
Check if the product package box includes all the components as follows:
•
Phone body including a base
• Handset
• Handset cord
• Patch cable
NOTE:
Power transformer sold separately. If any of these items are missing or dam-
aged, please contact your dealer.
PHONE INSTALLATION
Connecting the Phone Body
1
Remove the base of the phone by
pressing the
[Push]
mark on the top
of the base.
Note: The base can be used to adjust
the phone angle in the high or low
position.
2
Connect a handset to the handset port
of the phone.
3
OPTIONAL: Connect the cable
through the middle hole of the base
to the PC, as shown in the figure.
When connecting to PC, connect one
end of the cable to the PC port of the
phone, and the other end of the cable
to the LAN port of the PC.
q
w
e
q
AC Power
w
LAN to Phone System
e
Phone to PC
r
Headset
r
OPTIONAL EQUIPMENT
SMT-i5264
[ADD-ON MODULE]
The
SMT-i5264
IP AOM can be registered and programmed
to function with any ITP 5100 keysets, SMT-i Series, and TDM
phones. This add-on module was cosmetically designed to
match the SMT-i5000 Series phones. In some applications
multiple IP AOMs can be supported per IP phone.
For instal-
lation instructions, see your System Administrator.
5
Connect the LAN cable (connected through the middle hole of the base to a
network) to the LAN port of the phone, as shown in the figure.
When power is supplied from the LAN port (PoE), the phone is booted upon
LAN connection.
If PoE is not supported, connect the power adapter to the
power port
of the
phone by running the cable through the middle hole of the base as shown
in the figure below. If the connected power adapter is plugged into an out-
let, the phone is booted. (The power adapter is supplied separately.)
4
Fix the base to the phone body by fit-
ting the bottom groove and then
securing the top side.
5
Secure the cable along the cable
guideline as shown in the figure. For
the cable of power adaptor, give
some slack before securing the cable
to the guideline to prevent easy
disconnect.
Home Page