manualshive.com logo in svg

Samsung OfficeServ SMT-I5220, User Manual

Share
Download
Samsung OfficeServ SMT-I5220 User Manual Download Page 258

CONFIGURATION MENU STRUCTURE

The 

Configuration Menu

options are as follows:

1.

EASY INSTALL

This option will guide you through setting up all required parameters for con-
necting the SMT keyset to your system.

2.

PHONE INFO

1. Version Info: Provides boot rom, software, DSP, and hardware version

information and date.

2. Network Info: Displays network mode, IP address of phone, network

(DNS1, DNS2), Gateway Information, Subnet Mask, MAC Address, LAN
(HUB), LAN (PC), PC Client, and Registered State.

3. MAC Address

3.

NETWORK

Displays Static IP, Dynamic IP, PPPoE, NAT, 802.1x, VLAN (LAN), and VLAN (PC).
Set to 

Use

or 

Not Use

.

4.

EXT. LOGIN

Allows the user to choose the option of permitting the phone either
login/logout from idle mode or only register to the server on power up. Once
the phone is placed into Extension Login mode, a display will show up to allow
you to enter any valid User ID and password. This function is also referred to
as hot desking (idle login). Set to 

Use

or 

Not Use

. Default password is 1234.

5.

SERVER

1. Primary System: The main processor’s IP address.
2. System 1~3: Up to 4 server IPs can be set.

6.

S/W UPGRADE

1. TFTP Server: The IP address of the TFTP server containing the IP software.
2. Upgrade: Starts the IP software upgrade process.

7.

FACTORY RESET

This option resets the SMT-i3105 to factory default settings.

8.

PHONE RESTART

This option reboots the SMT-i3105 phone.

14

  

  

 

  

 

SECTION 3.

FREQUENTLY USED FEATURE

OPERATION

15

  

  

 

  

 

Home Page

Summary of Contents for OfficeServ SMT-I5220



















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands