Samsung OfficeServ SMT-I5220 User Manual Download Page 415

Page: 415 / 626

MENU STRUCTURE

The IP SETUP MENU is configured as follows:

SYSTEM EASY WIZARD

This option will guide you through setting up all required parameters for con-
necting the ITP keyset to your system.

SYSTEM INFORMATION

Version Info: Provides boot rom, software, DSP, and hardware version
information.

Network Info: Displays network mode, IP address of phone, network, and
gateway information.

Netmask

Gateway

Note that items 2 to 4 are only displayed when setting Manual IP.

NETWORK SETUP

This menu allows you to individually setup the same parameters found in the
Easy Wizard.

LOAD & UPGRADE SETUP

Upgrade TFTP Server:The IP address of the TFTP server containing the ITP
software.

Upgrade Start: Starts the ITP software upgrade process.

SYSTEM SERVER SETUP

Server IP Address: The main processor’s IP address.

Server ID: The ID assigned to your ITP (see your phone administrator for
this information).

Server Pass: The password assigned to your ITP (see your phone adminis-
tratror for this information).

PHONE SETUP

1. Idle Mode: Allow or Deny access to the Hot Desking (Idle Login) feature.

FACTORY RESET

This option resets ITP to factory default settings.

REBOOT

This option reboots the ITP.

SETTING HOT DESKING (IDLE LOGIN)

Hot Desking allows you to log in and out of your ITP-5107S without rebooting.

•

From the Main Menu, select

[6. PHONE SETUP]

to turn Hot Desking

on or off.

•

Select

[1. IDLE MODE]

•

Enter

allow

Hot Desking,

Enter

deny

Hot Desking.

•

Press

SPEAKER

•

Press

HOLD

SETTING THE NETWORK PARAMETERS

Utilize the following programming steps to program the ITP-5107S keyset to
operate within the users network.

YOU CAN SELECT THE SYSTEM EASY WIZARD

TO PROGRAM ALL REQUIRED NETWORK PARAMETERS IF YOU WANT TO SET
UP THESE PARAMETERS INDIVIDUALLY FOLLOW THE INSTRUCTIONS BELOW.

Network Parameter Setup

Get into the SETUP MODE as shown on page
8.

From the Setup, Main Menu, select

[3.

NETWORK SETUP]

to set or modify the net-

work parameters. Scroll to this option using
the volume

[

]~[

]

button and press

SPEAKER.

Select the

Network Mode Setup

and press

SPEAKER

, the LCD will display this message.

•

[1. MANUAL IP]

is selected, the user must enter the IP address of the IP key-

set. Then enter the subnet mask, and gateway value for the customer net-
work.

•

[2. DHCP]

is selected, the IP address, subnet mask, and gateway value will

be obtained automatically (if a DHCP server is present).

6.PHONE SETUP

1.IDLE MODE

IDLE MODE En(1)/Dis(0)
0_

3.NETWORK MODE SET UP

>1.MANUAL IP

2.DHCP

Home Page

Summary of Contents for OfficeServ SMT-I5220



















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ SMT-I5220

Reviews:

Brands by name

Popular brands

Samsung OfficeServ SMT-I5220, User Manual

Search results

Summary of Contents for OfficeServ SMT-I5220

Reviews:

Brands by name

Popular brands