Samsung OfficeServ SMT-I5220, User Manual

Page: 609 / 626

35
CUSTOMER SET RELOCATION
This program is used to swap information associated with two stations. All assign-
ments such as trunk ring, station group, station COS, station speed dial etc. will fol-
low this program. 18 button keysets and 28 button keysets can be exchanged. If
incompatible set types are selected the system will provide an ERROR: NO MATCH
message. 18 button and 28 button key assignments should be taken in consider-
ation when relocating these type of sets.The table below shows which phones can
be switched with each other.
NOTE: In order to use this program it must first be activated by a technician. Please
see your installing company to have this done if you wish to use this program. Set
Relocation does not apply to ITP/SMT-i Series phones.
PROGRAM KEYS
UP
&
DOWN
- Used to scroll through options.
KEYPAD
- Used to enter selections.
SOFT KEYS
- Move cursor left and right.
SPK
- Used to store data and advance to next program.
HOLD
- Used to clear previous entry.
ANS/RLS
- Used to select ALL.
ACTION DISPLAY
1. Press
TRSF 315
SET RELOCATION
Display shows
EXT _ EXT
2. Enter first station number (e.g.,
202
)
SET RELOCATION
Press
RIGHT
soft key to move cursor
EXT 202 EXT _
3. Enter second station number (e.g.,
210
)
SET RELOCATION
Press
RIGHT
soft key to enter data
EXT 202 EXT 210
4. Display will return to
STEP 1
SET RELOCATION
Go to
STEP 2
EXT _ EXT
OR press
TRSF
to store and exit
programming.
36
[DCS Keysets and 32 button AOM not supported on the OS 7100].
CUSTOMER SET RELOCATION ALLOW TABLE
Single
Line
DCS*, DS &
iDCS 64 AOM
iDCS 8B iDCS 18B iDCS 28B DS5021D DS5014D DS5007S
Single
Line
YES NO NO NO NO NO NO NO
DCS*, DS
& iDCS 64
AOM
NO YES NO NO NO NO NO NO
iDCS 8B NO NO YES NO NO NO NO NO
iDCS 18B NO NO NO YES YES NO NO NO
iDCS 28B NO NO NO YES YES NO NO NO
DS5021D NO NO NO NO NO YES NO NO
DS5014D NO NO NO NO NO NO YES NO
DS5007S NO NO NO NO NO NO NO YES
Home Page