Waveform Analysis
R&S
®
RTM3000
120
User Manual 1335.9090.02 ─ 08
Fast segmentation takes effect for [Single] acquisitions if "Nx
Single" > 1.
See also:
Chapter 6.4.1, "Segmented Memory"
Remote command:
Show History
Enables or disables the history.
6.4.4
Segment Table and History Player
The memory segments are continuously written when an acquisition is running. When
you activate the history, the segment table opens but it is empty when the acquisition is
running. When you stop the acquisition, the captured segments are listed in the seg-
ment table, and the history player becomes active.
The segment table shows the index and timestamp of all history segments, and
whether the segment was captured on a trigger event or in auto mode. Below the table,
you find the history player with functions to view the segments that are stored in the
memory.
The history segments store the data of the currently active channels. You can acquire
several channels at once, and display and analyze the channels individually.
You can show all history segments in sequence, or display a single segment.
To display history segments
1. Activate the history.
2. Stop the acquisition.
3. Set the "Time Format" to be shown in the table: absolute or relative time.
4. Set the "Speed".
5. To play all segments once, tap "Run".
6. To play all segments repeatedly:
a) Enable the "Repeat" button.
b) Tap "Run".
History and Segmented Memory (Option R&S
RTM-K15)
www.allice.de
Allice Messtechnik GmbH
