Remote Control Commands
R&S
®
RTM3000
487
User Manual 1335.9090.02 ─ 08
Parameters:
<LowerLevel>
*RST:
400 mV
Default unit: V
SEARch:TRIGger:LEVel:RISetime:UPPer
<UpperLevel>
Sets the upper voltage threshold. When the signal crosses this level, the rise/fall time
measurement starts or stops depending on the selected slope.
Parameters:
<UpperLevel>
*RST:
600 mV
Default unit: V
SEARch:TRIGger:RISetime:RANGe
<Range>
Sets how the measured rise or fall time is compared with the given limit(s).
To set the rise/fall time, use
To set the range ± Δt, use
Parameters:
<Range>
LONGer | SHORter | WITHin | OUTSide
LONGer
Finds rise/fall times longer than the given time.
SHORter
Finds rise/fall times shorter than the given time.
WITHin
Finds rise/fall times inside the range
time ± Δt
.
OUTSide
Finds rise/fall times outside the range
time ± Δt
.
*RST:
LONG
SEARch:TRIGger:RISetime:TIME
<Time>
Sets the reference rise or fall time, the nominal value for comparisons.
Parameters:
<Time>
Range:
Depends on various settings, mainly time base and
sample rate
*RST:
200e-6
Default unit: s
SEARch:TRIGger:RISetime:DELTa
<DeltaTime>
Sets a range Δt to the reference rise/fall time set with
Within
or
Outside
. The
instrument finds rise/fall times inside or outside the range
time ± Δt
.
Waveform Analysis
www.allice.de
Allice Messtechnik GmbH
