Rohde & Schwarz R&S RTM-B1, User Manual

Page: 461 / 854

Remote Control Commands
R&S
®
RTM3000
461 User Manual 1335.9090.02 ─ 08
TRIGger:A:WIDTh:RANGe <RangeMode>
Defines how the measured pulse width is compared with the given limits.
Parameters:
<RangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin | OUTSide
Triggers on pulses inside or outside a range defined by time ±
delta . The time is specified with
TRIGger:A:WIDTh:WIDTh
,
the range around is defined with
TRIGger:A:WIDTh:DELTa
.
To trigger on an exact value ("Width =" or "Width
≠
", set the
range to 0 ("Variation",
TRIGger:A:WIDTh:DELTa
).
SHORter | LONGer
Triggers on pulses shorter or longer than a time set with
TRIGger:A:WIDTh:WIDTh
.
*RST: LONGer
TRIGger:A:WIDTh:WIDTh <Time1>
For the ranges WITHin and OUTSide (defined using
TRIGger:A:WIDTh:RANGe
), the
<Time1> defines the center of a range which is defined by the limits
±
<Delta> (set with
TRIGger:A:WIDTh:DELTa
).
For the ranges SHORter and LONGer, the width defines the maximum and minimum
pulse width, respectively.
Parameters:
<Time1> Center value, maximum value or minimum value depending on
the defined range type.
Range:
20E-9 to 6.87194685440
Increment: Depends on the <Time1> value
*RST:
20E-9
TRIGger:A:WIDTh:DELTa <Delta>
Defines a variation range around the width value specified using
TRIGger:A:WIDTh:
WIDTh
.
Parameters:
<Delta> Variation
±Δ
t
Range: Minimum is 0. Maximum depends on the defined
pulse width (TRIG:A:WIDTH:WITDH).
Trigger
www.allice.de Allice Messtechnik GmbH