Ricoh LD430c Operating Instructions Manual Download Page 957

Page: 957 / 964

Supplementary Informations

177

• If you combine this function with the Duplex (Top to Top) function and se-

lect

[

P1,P2...

]

[

1/5,2/5...

]

, page numbers on the back are printed as follows:

Front

Back

❖

Front Cover, Front/Back Cover

• If Blank mode is selected, the cover will not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings

made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• At Mode Selected… Depends on the setting done from Cover Sheet

Tray.

• Full Time… Depends on the setting done from Paper Type.

See “Paper Type”, “Cover Sheet Tray”, General Settings Guide.

❖

Slip sheet

• If you do not copy onto slip sheets, they are excluded from the number of

copies counted.

GCSTMPBE

Summary of Contents for LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Ricoh LD430c, Operating Instructions Manual, Page: 957 / 964

Search results

Summary of Contents for LD430c

Reviews: