Ricoh LD430c, Operating Instructions Manual, Page: 138 / 964

System Settings
60
2
❖
NCP Delivery Protocol
Select the protocol for NCP delivery.
• IPX Priority
•
TCP / IP Priority
• IPX Only
• TCP/IP Only
If you select “IPX Only” or “TCP/IP Only”, you cannot switch the protocol
even if you cannot connect with it. If “NetWare” in
[ Effective Protocol ] is set to
“Inactive”, you can only use TCP/IP.
❖
NW Frame Type
Select the frame type when you use NetWare.
•
Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
❖
SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
“*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
❖
SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
“*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
❖
Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment.
[ Auto Select ] should
usually be selected.
•
Auto Select
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• 100Mbps Full Duplex
• 10Mbps Half Duplex