Ricoh LD430c, Operating Instructions Manual, Page: 919 / 964

Programs
139
2
Programs
You can store the frequently used copy job settings in the machine memory and
recall them for future use.
You can store up to 10 programs.
Note
❒
You can select the standard mode or program No. 10 as the mode to be set
when modes are cleared or reset, or immediately after the operation switch is
turned on. See “Programming Defaults in Initial Display”.
❒
Paper settings are stored based on paper size. So if you place more than one
paper tray of the same size, the paper tray prioritized with User Tools (Sys-
tem Settings) will be selected first. See “Paper Tray Priority”, General Settings
Guide.
❒
Programs are not deleted by turning the power off or by pressing the
{
Clear
Modes
}
key.
Storing a Program
Stores a program.
A
Edit the copy settings so all functions you want to store in this program are
selected.
B
Press the
{
Program
}
key.
C
Press [ Program ] .
AMG042S