Ricoh LD430c, Operating Instructions Manual, Page: 89 / 964

Connecting to the Interfaces
11
1
Note
❒
Select [ 802.11 Ad-hoc Mode ] mode when connecting Windows XP as a wireless
LAN client using Windows XP standard driver or utilities, or when not using
the infrastructure mode.
❒
For details about how to specify wireless LAN settings from the control panel
on the machine, see “IEEE 802.11b”.
❒
For details about how to specify wireless LAN settings from other than the
control panel on the machine, see “Using Utilities to Make Settings”.
❒
For details about the setting items, see “IEEE 802.11b”.
Reference
p.65 “IEEE 802.11b”
p.35 “Using Utilities to Make Network Settings”
Checking the Connection
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖
When using in infrastructure mode
1.
If [ LAN Type ] on the [ Interface Set-
tings ] / [ Network ] screen is not set to
[ IEEE 802.11b ] , it does not light, even
if the main power is on.
2.
If it is connected properly to the
network, the LED is green when in
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.
ZGDH600J
1
2