Ricoh LD430c, Operating Instructions Manual, Page: 468 / 964

Troubleshooting When Using the Scanner Function
74
5
Memory is full.
Cannot scan. The
scanned data
will be deleted.
Because of insufficient hard disk
space, the first page could not be
scanned. Try one of the following measures:
• Wait for a while, and then re-
try the scan operation.
• Reduce the scan area or scan-
ning resolution. See “Setting
items for Scan Settings”, Scan-
ner Reference.
• Delete unneeded stored files.
See “Deleting a Stored File”,
Scanner Reference.
Memory is full.
Do you want to
store scanned
file?
Because there is not enough free
hard disk space in the machine
for storing in the Document Serv-
er, only some of the pages could
be scanned. Specify whether to use the data or
not.
No paper. Load
paper of one of
the following
sizes, then
press [Start
Printing].
No paper is set in the specified
paper tray. Load paper of the sizes listed in
the message.
Exceeded max.
data capaci-
ty.Check the
scanning resolu-
tion, then reset
original(s).
The scanned original exceeded
maximum data capacity. Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See “Re-
lationship between Resolution
and File Size”, Scanner Reference.
Exceeded max.
data capaci-
ty.Check scan-
ning resolution,
then press Start
key again.
The scanned data exceeded max-
imum data capacity. Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See “Re-
lationship between Resolution
and File Size”, Scanner Reference.
Exceeded max.
page capacity
per file. Press
[Send] to send
the scanned da-
ta, or press
[Cancel] to de-
lete.
The number of scanned pages ex-
ceeded maximum page capacity. Select whether to send the data so
far.
Message Cause Solution
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 74 Thursday, January 12, 2006 2:03 PM