manualshive.com logo in svg

Ricoh LD430c, Operating Instructions Manual, Page: 385 / 964

Share
Download
Ricoh LD430c Operating Instructions Manual Download Page 385

In accordance with IEC 60417, this machine uses the following symbols for the main power switch: 

a

 means POWER ON.

b

 means POWER OFF.

c

 means STAND BY.

Trademarks

Microsoft

®

, Windows

®

 and Windows NT

®

 are registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Acrobat

®

 is a registered trademark of Adobe Systems Incorporated.

NetWare is a registered trademark of Novell, Inc.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.

The proper names of the Windows operating systems are as follows:

•

The product name of Windows

®

 95 is Microsoft

®

 Windows

®

 95

•

The product name of Windows

®

 98 is Microsoft

®

 Windows

®

 98

•

The product name of Windows

®

 Me is Microsoft

® 

Windows

® 

 Millennium Edition (Windows Me)

•

The product names of Windows

®

 2000 are as follows:

Microsoft

®

 Windows

®

 2000 Advanced Server

Microsoft

®

 Windows

®

 2000 Server

Microsoft

®

 Windows

®

 2000 Professional

•

The product names of Windows

®

 XP are as follows:

Microsoft

®

 Windows

®

 XP Professional

Microsoft

®

 Windows

®

 XP Home Edition

•

The product names of Windows Server

TM

 2003 are as follows:

Microsoft

®

 Windows Server

TM

 2003 Standard Edition

Microsoft

®

 Windows Server

TM

 2003 Enterprise Edition

Microsoft

®

 Windows Server

TM

 2003 Web Edition

•

The product names of Windows

®

 NT are as follows:

Microsoft

®

 Windows NT

®

 Server 4.0

Microsoft

®

 Windows NT

®

 Workstation 4.0

Copyright © 2005

Summary of Contents for LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments