Ricoh LD430c, Operating Instructions Manual, Page: 128 / 964

System Settings
50
2
❖
Output: Printer (printer)
Specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
•
Internal Tray 1
• Internal Tray 2
• Finisher Upper Tray
• Finisher Shift Tray
❖
System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
•
On: 15 second(s)
• Off
By selecting
[ On ] , you can specify a display time between 10 and 999 seconds.
❖
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
• Off
•
Normal
• Repeat Time: Medium
• Repeat Time: Long
Note
❒
If the Panel Tone setting is
[ Off ]
, the beeper does not sound, whatever the
Warm Up Notice setting.
❒
The Function Reset Timer setting is ignored if Interleave is set for Print Prior-
ity.
Reference
“Function Compatibility”, Copy/Document Server Reference
Output tray settings
Important
❒
You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒
When the 500-sheet finisher, 1000-sheet finisher, or booklet finisher is in-
stalled and Staple or Shift Sort is specified for a job, the job will be delivered
to the finisher shift tray regardless of the output tray specified.