Ricoh LD430c, Operating Instructions Manual, Page: 430 / 964

Troubleshooting When Using the Facsimile Function
36
3
Note
❒
If the “
Check whether there are any network problems.
” message ap-
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
can specify the setting so this message is not displayed, and then the
{
Facsim-
ile
}
key no longer lights. See “Parameter Settings”, General Settings Guide. If
you reconnect the machine to the network, be sure to set “Display” with User
Parameters.
❒
If the paper tray runs out of paper, “
Add paper.
” appears on the display, ask-
ing you to add more paper. If there is paper left in the other trays, you can re-
ceive documents as usual, even if the message appears on the display. You
can turn this function on or off with “Parameter Setting”. See “Parameter Set-
tings”, General Settings Guide.
Check whether
there are any
network prob-
lems.
{
15-12
}
Cannot log on to the
POP3/IMAP4 server. • Check that the user name and
password of the E-mail Ac-
count are correctly pro-
grammed from File Transfer
under System Settings. See
“File Transfer Settings”, Gen-
eral Settings Guide. You can
also use the Web Image Mon-
itor for confirmation. See the
Web Image Monitor's Help.
• Check that the user name and
password for POP before
SMTP authentication are cor-
rectly programmed from File
Transfer under System Set-
tings. See “File Transfer Set-
tings”,General Settings
Guide. You can also use the
Web Image Monitor for con-
firmation. See the Web Image
Monitor's Help.
• Consult the administrator.
Message Cause Solution
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 36 Thursday, January 12, 2006 2:03 PM