Ricoh LD430c, Operating Instructions Manual, Page: 418 / 964

Troubleshooting When Using the Copy Function
24
2
❖
Stamp
❖
Combine
In Margin Adjustment
mode, parts of the orig-
inal image are not cop-
ied. You set a wide erased margin. Set a narrower margin with User
Tools. You can set the width be-
tween 0-30 mm (0”-1.2”).
See “Front Margin: Left/Right”,
“Back Margin: Left/Right”,
“Front Margin: Top/Bottom”
and “Back Margin: Top/Bot-
tom”, General Settings Guide.
In Margin Adjustment
mode, parts of the orig-
inal image are not cop-
ied. There is a lack of margin space on
the opposite side of the binding
position. Set a narrower margin with User
Tools. You can set the width be-
tween 0-30 mm (0”-1.2”).
See “Front Margin: Left/Right”,
“Back Margin: Left/Right”,
“Front Margin: Top/Bottom”
and “Back Margin: Top/Bot-
tom”, General Settings Guide.
In Image Repeat mode,
the original image is
not copied repeatedly. You selected copy paper the same
size as the originals, or you did
not select the proper reproduc-
tion ratio. Select copy paper larger than the
originals or select the proper re-
production ratio.
Problem Cause Solution
The stamp position is
wrong. The paper orientation is wrong. Check the paper orientation and
stamp position.
Problem Cause Solution
You cannot make a
book from Booklet or
Magazine mode by
folding copies. You selected a setting (“Open to
left”or “Open to right”) that does
not match the orientation of orig-
inals. Change the setting. See “Orienta-
tion: Booklet, Magazine”, Gener-
al Settings Guide.
When using Combine,
parts of the image are
not copied. You specified a reproduction ra-
tio that does not match the sizes
of your originals and copy paper. When you specify a reproduction
ratio using Manual Paper Select
mode, make sure that the ratio
matches your originals and the
copy paper. Select the correct re-
production ratio before using
Combine mode.
Copies are not in cor-
rect order. You placed the originals in the in-
correct order. When placing a stack of originals
in the ADF, the last page should
be on the bottom.
If you place an original on the ex-
posure glass, start with the first
page to be copied.
Problem Cause Solution
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 24 Thursday, January 12, 2006 2:03 PM