Ricoh LD430c, Operating Instructions Manual, Page: 140 / 964

System Settings
62
2
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
[ Parallel Interface ] is displayed when this machine is installed with the IEEE 1284
interface board.
❖
Parallel Timing
Sets the timing for the control signal of the parallel interface.
•
ACK outside
• ACK inside
• STB down
❖
Parallel Communication Speed
Sets the communication speed for the parallel interface.
•
High Speed
• Standard
❖
Selection Signal Status
Sets the level for the select signal of the parallel interface.
•
HIGH
• LOW
❖
Input Prime
Sets whether to validate or invalidate the input prime signal upon reception.
• Active
•
Inactive
❖
Bidirectional Communication
Sets the printer's response mode to a status acquisition request when using a
parallel interface.
•
On
• Off
When set to
[ Off ] , bidirectional communication function will be disabled, and
the printer driver will not be installed under Windows Auto Detect function.
❖
Signal Control
Specify how error during printing or sending facsimile from the computer is
to be dealt with.
•
Job Acceptance Priority
• Printer Priority