Ricoh LD430c, Operating Instructions Manual, Page: 462 / 964

Troubleshooting When Using the Scanner Function
68
5
When a Message is Displayed
This section explains likely causes of and possible solutions for error messages
that may appear on the machine's control panel.
When a Message is Displayed on the Control Panel
This section explains causes and remedies if an error message appears on the
display of the control panel.
Important
❒
If an error message that is not included in this section appears, turn off the
main power switch of the machine, and then turn it on again. For information
about how to turn off the main power switch, see About This Machine.
Message Cause Solution
Connection with
LDAP server has
failed. Check
the server sta-
tus.
A network error has occurred
and connection has failed. Try the
operation once more. Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See “System Settings”,
General Settings Guide.
LDAP server au-
thentication has
failed. Check
the settings.
The user name and password dif-
fer from those set for LDAP Au-
thentication. Make settings correctly for the
user name and the password for
LDAP server authentication.
The destination
list has been
updated. Speci-
fied destina-
tion(s) or
sender's name
has been
cleared.
A specified destination or send-
er's name was cleared when the
destination list in the delivery
server was updated. Specify the destination or send-
er's name again.
Updating the
destination list
has failed. Try
again?
A network error has occurred. Check whether the server is con-
nected.
The destination
list has been
updated. Speci-
fied destina-
tion(s) or
sender's name
has been
cleared.
The destination list is being up-
dated. If a destination or sender's name
was already selected, re-select it
after this message disappears.
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 68 Thursday, January 12, 2006 2:03 PM