Ricoh LD430c, Operating Instructions Manual, Page: 818 / 964

Copying
38
2
When copying onto OHP Transparencies or Thin Paper
When copying onto OHP transparencies or thin paper, select the type and size
of paper.
Important
❒
We recommend that you use specified OHP transparencies.
❒
OHP transparencies must be loaded face down in the tray with the notched
corner of the sheet in the appropriate corner of the tray.
❒
To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
❒
When copying onto OHP transparencies, remove copied sheets one by one.
A
Open the bypass tray, and then align the paper guide to the paper size.
B
Insert the paper face down until you hear the beep.
C
Press the
{
q
}
key.
D
Select paper type ( [ OHP (Transparency) ] or [ Thin Paper ] ) in the special paper
settings.
E
Select the paper size, and then press [ OK ] to return to the initial display.
F
Place the paper, and then press the
{
Start
}
key.
G
When the copy job is finished, press the
{
Clear Modes
}
key to clear the set-
tings.
Note
❒
For OHP transparencies or thin paper, print speed is slower when com-
pared to printing on plain paper.