Ricoh LD430c, Operating Instructions Manual

Page: 244 / 964

Facsimile Features
166
4
L
Enter the vertical size of the paper using the number keys, and then press
the
{
q
}
key.
Specify a vertical size from 210 mm (8.3”) to 297 mm 11.6”). You cannot enter
a size smaller than 210 mm or larger than 297 mm.
Each time you press
[ mm ] or [ inch ] , the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [ mm ] or [ inch ] ,
it is converted automatically (fractions are rounded off).
M
Enter the horizontal size of the paper using the number keys, and then
press the
{
q
}
key.
Specify a horizontal size from 148 mm (5.9”) to 600 mm (23.7”). You cannot
enter a size smaller than 148 mm or larger than 600 mm.
Each time you press
[ mm ] or [ inch ] , the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [ mm ] or [ inch ] ,
it is converted automatically (fractions are rounded off).
N
Press [ OK ] .
O
Press [ Exit ] .
P
Press the
{
User Tools/Counter
}
key.
Note
❒
If you select [ Auto Detect ] , the machine recognizes the paper size automati-
cally.
Reference
“Reception Settings”, Facsimile Reference