Ricoh LD430c, Operating Instructions Manual, Page: 95 / 964

Network Settings
17
1
Note
❒
In [ Effective Protocol ] , check that the protocol you want to use is set to [ Active ] .
❒
[ LAN Type ]
is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒
[ SMTP Server ] and [ Fax E-mail Account ] must be specified in order to use the
send function.
❒
When [ POP before SMTP ] is set to [ On ] , also make setting for [ Reception Protocol ]
and [ POP3 / IMAP4 Settings ] .
❒
When [ SMTP Authentication ] is set to [ On ] , also make setting for [ Administrator's
E-mail Address ] .
❒
[ E-mail Communication Port ] and [ Fax E-mail Account ] must be specified in order
to use the reception function.
❒
When setting [ POP before SMTP ] to [ On ] , check [ POP3 ] port number in [ E-mail
Communication Port ]
.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Internet Fax with IEEE 1394 in-
terface cable
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address Neccessary
Interface Settings/IEEE 1394 DDNS Configuration As required
Interface Settings/IEEE 1394 Host Name As required
Interface Settings/IEEE 1394 Domain Name As required
Interface Settings/IEEE 1394 WINS Configuration As required
Interface Settings/IEEE 1394 IPv4 over 1394 Neccessary
Interface Settings/Network IPv4 Gateway Address Neccessary
Interface Settings/Network DNS Configuration As required
Interface Settings/Network Effective Protocol Neccessary
File Transfer SMTP Server Neccessary
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3 / IMAP4 Settings As required