Ricoh LD430c, Operating Instructions Manual, Page: 489 / 964

Maintenance
95
6
❒
When performing the auto color calibration from the printer function, se-
lect test patterns from
[ 600
×
600 dpi ]
,
[ 1800
×
600 dpi ]
and
[ 1800
×
600 dpi ]
and
then press [ Start Printing ] .
❒
The test pattern will be printed on an A4
K
, 8
1
/
2
”
×
11”
K
size page (If
A4
K
is not available then A3
L
, B4 JIS
L
will be used.). Make sure to
check the paper set in the paper tray.
❒
Set the test pattern in the following way:
❒
When the ADF is installed, make sure to set the test pattern on the expo-
sure glass, and then 2 or 3 white sheets, same size as the test pattern, above
the test pattern.
Returning to the Previous Setting
“Previous Setting” means to return to the previous status before any changes.
A
Press [ Previous Setting ] .
B
Press [ Yes ] .
The settings return to the previous contents.
Note
❒
When returning the auto color calibration of the copy function, press
[ Pre-
vious Setting ] of the Copier Function. If returning the auto color calibration
of the printer function, press [ Previous Setting ] of the Printer Function.
GCCLCPIE
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 95 Thursday, January 12, 2006 2:03 PM