Ricoh LD430c, Operating Instructions Manual, Page: 90 / 964

Connecting the Machine
12
1
❖
When using in adhoc mode / 802.11 ad hoc mode
1.
If the IEEE 802.11b interface unit
is functioning, the LED lights up in
orange.
2.
If it is connected properly to the
network, the LED is green when in
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.
Print the configuration page to verify settings.
Note
❒
For more information about printing a configuration page, see “Print List”.
Reference
p.182 “Printing the configuration page”
Checking the Signal
When using in infrastructure mode, you can check the machine's radio wave sta-
tus using the control panel.
A Press
[ System Settings ]
.
B Press [ Interface Settings ] .
C Press [ IEEE 802.11b ] .
D
Press [ Wireless LAN Signal ] .
The machine's radio wave status appears.
E
After checking radio wave status, press [ Exit ] .
F
Press the
{
User Tools/Counter
}
key to return to the User Tools / Counter / In-
quiry menu.
Note
❒
To check the radio wave status, press [ IEEE 802.11b ] under [ LAN Type ] in Net-
work menu of Interface Settings.
Reference
p.35 “Using Utilities to Make Network Settings”
p.65 “IEEE 802.11b”
ZGDH600J
1
2