Ricoh LD430c, Operating Instructions Manual, Page: 683 / 964

Changing the Extended Security Functions
155
6
❖
Enhance File Protection
This can be specified by the file administrator. By specifying a password, you
can limit operations such as printing, deleting, and sending files, and can pre-
vent unauthorized people from accessing the files. However, it is still possible
for the password to be cracked.
By specifying "Enhance File Protection", files are locked and so become inac-
cessible if an invalid password is entered ten times. This can protect the files
from unauthorized access attempts in which a password is repeatedly
guessed.
The locked files can only be unlocked by the file administrator. When "En-
hance File Protection" is specified, (
) appears at the screen.
Note
❒
If files are locked, you cannot select them even if the correct password is
entered.
• On
• Off
Note
❒
Default: Off
❖
Settings by SNMP v1 and v2
This can be specified by the network administrator. When the machine is ac-
cessed using the SNMPv1, v2 protocol, authentication cannot be performed,
allowing machine administrator settings such as the paper setting to be
changed. If you select
[ Prohibit ]
, the setting can be viewed but not specified
with SNMPv1, v2.
• Prohibit
• Do not Prohibit
Note
❒
Default: Do not Prohibit
❖
Restrict Use of Simple Encryption
This can be specified by the network administrator.
For example, this setting is set to
[ On ]
and you want to edit the address book
in User Management Tool or Address Management Tool in SmartDevice-
Monitor for Admin, or you want to access the machine using DeskTopBinder
or the ScanRouter delivery software, enable SSL/TLS for encrypted commu-
nication. For details about specifying SSL/TLS, see p.145 “Setting the SSL /
TLS Encryption Mode”.
If you select
[ On ]
, specify the encryption setting using the printer driver.
• On
• Off
Note
❒
Default: Off
AthenaC1-EN_Sec_F2_FM_forPaper.book Page 155 Wednesday, January 18, 2006 4:53 PM