Ricoh LD430c, Operating Instructions Manual, Page: 410 / 964

When the Machine Does Not Operate as Wanted
16
1
Note
❒
Stapling cannot be used at the same time for multiple functions.
❒
If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in “Print Priority”. This setting is
factory-preset to “Display mode”. For setting of Printing Priority Function,
see “Print Priority”, General Settings Guide.
❒
When Booklet Finisher, 500-sheet Finisher or 1000-sheet Finisher is installed
on the machine, you can specify the output tray where documents are deliv-
ered. See “Output tray settings”, General Settings Guide.
❒
While printing is in progress, scanning a document using another function
may take more time.
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 16 Thursday, January 12, 2006 2:03 PM