Ricoh LD430c, Operating Instructions Manual, Page: 345 / 964

Registering SMTP and LDAP Authentication
267
7
LDAP Authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see
“LDAP Server Settings”, Network Guide.
Important
❒
When [ Do not Specify ] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program/Change LDAP Server of
Administrator Tools settings applies. For details, see “LDAP Server Settings”.
A
Press [ System Settings ] .
B
Press [ Administrator Tools ] .
C
Press [ Address Book Management ] .
D
Check that
[ Program/Change ]
is selected.
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
E
Press the name you want to register or enter the registered number using
the number keys.
F
Press [ Auth. Info ] , and then press [ Next ] .
G
Press [ Specify Other Auth. Info ] on the right side of LDAP Authentication.