Ricoh LD430c, Operating Instructions Manual, Page: 477 / 964

Changing the Paper Size
83
6
Changing the Paper Size
This section explains how to change a paper size.
Procedures for changing the paper size differ depending on the tray (tray 1 or
other optional paper tray units). Make sure you are following the appropriate
procedure before you begin.
Note
❒
Be sure to select the paper size with User Tools. If you do not, misfeeds might
occur.
❒
Tray 1 and LCT (optional) use only 8
1
/
2
”
×
11” K paper. To load A4 K , con-
tact your service representative.
❒
Fan the paper before loading.
❒
Straighten curled or warped paper before loading.
❒
For details about paper sizes and types, see “Copy Paper”, About This Ma-
chine.
Changing the Paper Size in the Paper Tray
The following procedure explains how to change a paper size in the paper tray.
Important
❒
Do not stack paper over the limit mark.
❒
Check the top of the paper is aligned to the right side.
A
Check that paper in the paper tray is not being used for copying, and then
pull the tray carefully out until it stops.
B
Remove papers if loaded.
AMJ001S
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 83 Thursday, January 12, 2006 2:03 PM