manualshive.com logo in svg

Ricoh LD430c, Operating Instructions Manual, Page: 129 / 964

Share
Download
Ricoh LD430c Operating Instructions Manual Download Page 129

Tray Paper Settings

51

2

Tray Paper Settings

This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.

Important

❒

If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.

❖

Paper Tray Priority: Copier (copier/Document Server)

Specify the tray to supply paper for output.
•

Tray 1

• Tray  2
• Tray  3  (optional)
• Tray  4  (optional)
When optional paper tray unit is installed, 

[

Tray 3

]

 and 

[

Tray 4

]

is displayed.

When optional LCT is installed, 

[

Tray 3

]

 is displayed.

❖

Paper Tray Priority: Facsimile (facsimile)

Specify the tray to supply paper for output.
•

Tray 1

• Tray  2
• Tray  3  (optional)
• Tray  4  (optional)
When optional paper tray unit is installed, 

[

Tray 3

]

 and 

[

Tray 4

]

is displayed.

When optional LCT is installed, 

[

Tray 3

]

 is displayed.

❖

Paper Tray Priority: Printer (printer)

Specify the tray to supply paper for output.
•

Tray 1

• Tray  2
• Tray  3  (optional)
• Tray  4  (optional)
When optional paper tray unit is installed, 

[

Tray 3

]

 and 

[

Tray 4

]

is displayed.

When optional LCT is installed, 

[

Tray 3

]

 is displayed.

Summary of Contents for LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments