Ricoh LD430c, Operating Instructions Manual, Page: 240 / 964

Facsimile Features
162
4
Note
❒
Selecting [ Same as Basic Settings ] will result in the same setting made for
“RX File Print Qty” of “Reception Settings”.
❒
If you make a mistake, press [ Clear ] or the
{
Clear/Stop
}
key before pressing
[ OK ] , and then try again.
Forwarding
Specify when programming a Special Sender.
Important
❒
One forward destination can be registered for eachSpecial Sender. To register
two or more forward destinations, use group destinations. However a maxi-
mum of 500 destinations can be specified in a group.
A
Press [ Forwarding per Sender ] .
B
Select
[ On ]
or
[ Off ]
.
If you select [ Off ] , proceed to step
D
.
C
Press the Destination key of a forward destination, and then press [ OK ] .
D
Press [ OK ] .
Note
❒
Selecting
[ Same as Basic Settings ]
will result in the same setting made for
“Forwarding” under “Administrator Tools”.
❒
Press the key on the left of the display to switch the destination between
fax number, e-mail address, IP-Fax destination, and folder.
❒
When a folder is specified as the forward destination, you can set a file for-
mat for forwarding. See “Parameter Settings” (switch 21, bit 3).