REXROTH Fv Series, Instruction Manual

Page: 95 / 222

This parameter is used to change the rotation direction of motor when run‐
ning commands are set by the operating panel.
●
0: Forward rotation
● 1: Reverse rotation
b1.09
Acceleration time 1 Factory default 10.0s
Setting range 0.1 − 3600.0s Minimum unit 0.1s
b1.10
Deceleration time 1 Factory default 10.0s
Setting range 0.1 − 3600.0s Minimum unit 0.1s
● The acceleration time is the duration, in which the converter changes
the output frequency from 0 Hz to ‘Maximum frequency’ [b1.05]. Shown
as T1 in figure fig. 7-17 "Acceleration time1 & Deceleration time 1" on
page 93 .
● The deceleration time is the duration, in which the converter changes
the output frequency from ‘Maximum frequency’ [b1.05] to 0 Hz. Shown
as T2 in figure fig. 7-17 "Acceleration time1 & Deceleration time 1" on
page 93 .
Fig.7-17: Acceleration time1 & Deceleration time 1
● 4 groups of acceleration/deceleration time are available, which can be
selected via external terminals. See parameters [E0.01] − [E0.08] and
[E2.00] − [E2.05] for related settings.
b1.11
Acceleration/deceleration mode Factory default 0
Setting range 0, 1 Minimum unit 1
This parameter sets the acceleration/deceleration mode of the converter to
linear or S-Curve in start, stop, forward or reverse, acceleration or decelera‐
tion processes.
●
0: Linear mode
–
The output frequency is increased or decreased linear as shown in
Figure fig. 7-18 "Linear acceleration/deceleration mode" on page
94 .
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 93/219
Parameter Settings