REXROTH Fv Series, Instruction Manual

Page: 92 / 222

Please also set ‘Highest input pulse frequency’ [E0.15]. ‘X8 termi‐
nal function’ [E0.08] is automatically set to 0 (invalid).
● 4: Set by external terminals Up/Down
Set output frequency by external control terminals
–
Step 1
–
Define any 3 external control terminals in parameters
[E0.01] ─ [E0.08] and set one to 9 ‘Frequency incremental Up
command’, one to 10 ‘Frequency decrement Down com‐
mand’, and one to 11 ‘Zeroing of external terminal frequency
setting’.
– Step 2
–
Set ‘Frequency changing rate’ [S3.11] for the frequency
change rate of the terminals Up/Down.
Fig.7-14: Frequency setting via external terminals Up/Down
Clear frequency Open Closed
Up terminal Open Closed
Open/
Closed
Down terminal Open Closed Open Closed
Converter frequency
reaction
Hold Decrease Increase Hold Zero
Fig.7-15: Relationship between terminal status and converter set frequency
● At power on [b1.04] is used as start up frequency.
–
If [b1.01] = 0 or 2 the current set frequency will not be
saved in [b1.04] using Stop command or power off.
– If [b1.01] = 1 or 3 the current set frequency will be
saved to [b1.04] using Stop command or power off.
● 5: Set via communication
–
Set output frequency by communication with the external computer
or PLC.
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
90/219
Parameter Settings