REXROTH Fv Series, Instruction Manual

Page: 124 / 222

Fig.7-46: Frequency level detection signal
E1.08
Converter over load pre-warning level setting Factory Default 100.0 %
Setting range
20.0 % − 100.0 %
(of rated converter current)
Minimum unit 0.1 %
If parameters [E1.00] − [E1.02] are set to ‘9: Converter over load pre-warn‐
ing’, and the converter output current exceeds the value ‘[E1.08] * converter
rated current’, output indicating signals will be output via output terminals.If
parameters [E1.00] − [E1.02] are set to ‘9: Converter over load pre-warning’,
and the converter output current exceeds the value ‘[E1.08] * converter rated
current’, output indicating signals will be output via output terminals.
E1.09
Motor over load pre-warning level setting Factory Default 100.0 %
Setting range
100.0 % − 250.0 %
(of rated motor current)
Minimum unit 0.1 %
If parameters [E1.00] − [E1.02] are set to ‘10: Motor over load pre-warning’,
and the converter output current exceeds the value ‘[E1.09] * motor rated cur‐
rent’, output indicating signals will be output via output terminals.
E1.10
FM1 analog outputs Factory Default 0
Setting range
0: Output frequency/rotation
speed
1: Set frequency/rotation speed
2: Output current
3: Torque current
4: Output voltage
Minimum unit 1
E1.11
FM1 channel mode Factory Default 0
Setting range
0：0 − 10 V or 0 − 20 mA
1：2 − 10 V or 4 − 20 mA
Minimum unit 1
E1.12
FM1 gain setting Factory Default 1.00
Setting range 0.00 − 10.00 Minimum unit 0.01
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
122/219
Parameter Settings