REXROTH Fv Series, Instruction Manual

Page: 151 / 222

Noise immunity limit values
Place of effect
Phenom‐
enon
Standard Conditions Coupling
Test values according
to standard EN 61800-3 Performance
level
Enclosure port
ESD IEC 61000-4-2 CD, AD 4 kV CD, 8 kV AD, B
RF field IEC 61000-4-3
Via antenna
on EUT
10 V / m A
Power port
Burst IEC 61000-4-4
mains con‐
nection
I<100 A:
discoupling
network
I≥100 A:
clamp or CN
2 kV / 2.5 kHz
(CN or CDN)
4 kV / 2.5 kHz
(clamp)
B
Surge
IEC 61000-4-5
only mains
connection;
I<63 A,
light load test
line-line 1 kV
line-earth 2 kV
B
IEC 61000-4-6 Length>3 m clamp 10 V, 0.15 - 80 MHz A
Power interface Burst IEC 61000-4-4 Length>3 m clamp 2 kV / 2.5 kHz B
Signal interface Burst
IEC 61000-4-4 Length>3 m clamp 1 kV / 2.5 kHz B
IEC 61000-4-6 Length>3 m
clamp or
CDN
10 V, 0.15 - 80 MHz A
Ports of process;
measurement
control lines
Burst
IEC 61000-4-4 Length>3 m clamp 2 kV / 2.5 kHz B
IEC 61000-4-6 length>3 m
clamp or
CDN
10 V, 0.15 - 80 MHz A
CD contact discharge
AD air discharge
CDN coupling and decoupling network
CN coupling network
Fig.9-7: Noise immunity limit values
Evaluation criterion
Evaluation criterion Explanation (abbreviated form from EN 1800-3)
A deviations within allowed range
B automatic recovery after interference
C
Switched off without automatic recovery. Device remains
undamaged.
Fig.9-8: Evaluation criterion
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 149/219
Technical Data