REXROTH Fv Series, Instruction Manual

Page: 112 / 222

– Stop key is only valid when ‘Converter control commands’ [b1.02]
is set to ‘0: Set control commands via operating panel’.
● 1: Valid for all control means
–
Stop key is valid for all settings of ‘Converter control commands’
[b1.02].
● Stop key as a fault reset key is valid for all settings of ‘Con‐
verter control commands’ [b1.02].
● If the converter is controlled by external commands and
stopped with the Stop key, in order to restart the converter,
the external commands have to be disabled first.
S3.16
Fan control Factory Default 0
Setting range 0, 1 Minimum unit 1
● 0: Temperature controlled
–
Automatically controls the start and stop of the cooling fan accord‐
ing to the detected temperature of the heat sink. The fan is always
active if converter is running.
● 1: Always on
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
110/219
Parameter Settings