REXROTH Fv Series, Instruction Manual

Page: 116 / 222

OFF ON ON ON Multi-speed frequency 7 [E2.12]
ON OFF OFF OFF Multi-speed frequency 8 [E2.13]
ON OFF OFF ON Multi-speed frequency 9 [E2.14]
ON OFF ON OFF Multi-speed frequency 10 [E2.15]
ON OFF ON ON Multi-speed frequency 11 [E2.16]
ON ON OFF OFF Multi-speed frequency 12 [E2.17]
ON ON OFF ON Multi-speed frequency 13 [E2.18]
ON ON ON OFF Multi-speed frequency 14 [E2.19]
ON ON ON ON Multi-speed frequency 15 [E2.20]
Fig.7-37: Multi-speed control terminals
● 5: Acceleration/deceleration time control terminal 1
● 6: Acceleration/deceleration time control terminal 2
Four options of acceleration/deceleration time are available with the combina‐
tions of the two terminals, as shown in fig. 7-38 "Multi-speed acceleration/de‐
celeration time" on page 114 .
Combination of terminal input signals Selected
acceleration
/deceleration time
Corresponding
parameter
Acc./Dec. time 2 Acc./Dec. time 1
OFF OFF
Acceleration time 1 [b1.09]
Deceleration time 1 [b1.10]
OFF ON
Acceleration time 2 [E2.00]
Deceleration time 2 [E2.01]
ON OFF
Acceleration time 3 [E2.02]
Deceleration time 3 [E2.03]
ON ON
Acceleration time 4 [E2.04]
Deceleration time 4 [E2.05]
Fig.7-38: Multi-speed acceleration/deceleration time
● 7: 3-wire control
–
Used to control the converter in 3-wire control mode. See parame‐
ter [E0.00].
● 8: Freewheel to stop activated
–
Used for large inertia loads without requirement to stop time.
– The converter blocks output and the motor’s stopping is not con‐
trolled by the converter.
● 9: Frequency increment Up command
● 10: Frequency decrement Down command
–
These two terminals are used to change the set frequency with ter‐
minals Up/Down. See parameters [b1.00] and [S3.11].
● 11: Zeroing of external terminal frequency setting
–
Used to clear the frequency set with terminals Up/Down and
change the set frequency to 0.
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
114/219
Parameter Settings