REXROTH Fv Series, Instruction Manual

Page: 137 / 222

Fig.7-54: Over load protection curve
E4.06
Phase loss protection Factory Default 0
Setting range 0, 1, 2, 3 Minimum unit 1
● 0: Both input and output phase loss protection active
–
Converter input phase loss protection is active, and operating pan‐
el displays IPH.L.
– Converter output phase loss protection is active, and operating
panel displays OPH.L.
● 1: Only input phase loss protection active
● 2: Only output phase loss protection active
● 3: Both input and output phase loss protection inactive
E4.07
Fault relay setting Factory Default 0
Setting range 0 − 3 Minimum unit 1
● Fault relay Ta, Tb, Tc settinng options
–
bit0: 0: Under voltage inactive; 1: Under voltage active
– bit1: 0: Auto reset inactive; 1: Auto reset active
● Data format of this parameter is show in fig. 7-55 "Data format of param‐
eter [E4.07]" on page 135 .
bit1 bit0
Fig.7-55: Data format of parameter [E4.07]
E4.08
Number of fault reset attempts Factory Default 0
Setting range 0 − 3 Minimum unit 1
E4.09
Interval between reset attempts Factory Default 10s
Setting range 2 − 60s Minimum unit 1s
● Automatic fault reset function can be used to ensure continuous running
without human intervention in the case of occasional faults, such as
over current and over voltage during start or running.
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 135/219
Parameter Settings