REXROTH Fv Series, Instruction Manual

Page: 22 / 222

Improper use of these devices, failure to fol‐
low the safety instructions in this document or
tampering with the product, including disa‐
bling of safety devices, may result in material
damage, bodily harm, electric shock or even
death!
WARNING
● Read these instructions before the initial start-up of the equipment in or‐
der to eliminate the risk of bodily harm or material damage. Follow these
safety instructions at all times.
● Bosch Rexroth AG is not liable for damages resulting from failure to ob‐
serve the warnings provided in this documentation.
● Read the operating, maintenance and safety instructions in your lan‐
guage before starting up the machine. If you find that you cannot com‐
pletely understand the documentation for your product, please ask your
supplier to clarify.
● Proper and correct transport, storage, assembly and installation as well
as care in operation and maintenance are prerequisites for optimal and
safe operation of this device.
● Only assign trained and qualified persons to work with electrical installa‐
tions.
● Only persons who are trained and qualified for the use and operation of
the device may work on this device or within its proximity. Furthermore,
they must be trained, instructed and qualified to switch electrical circuits
and devices on and off in accordance with technical safety regulations
and to mark them according to the requirements of safe work practices.
They must have adequate safety equipment and be trained in first aid.
● Only use spare parts and accessories approved by the manufacturer.
● Follow all safety regulations and requirements for the specific applica‐
tion as practiced in the country of use.
● The devices have been designed for installation in industrial machinery.
● The ambient conditions given in the product documentation must be ob‐
served.
● Only use safety-relevant applications that are clearly and explicitly ap‐
proved in the Project Planning Manual.If this is not the case, they are
excluded.
● Safety-relevant are all such applications which can cause danger to per‐
sons and material damage.
● The information given in the documentation of the product with regard to
the use of the delivered components contains only examples of applica‐
tions and suggestions.
● The machine and installation manufacturer must make sure that the de‐
livered components are suited for each individual application. Check the
information given in this document with regard to the use of the compo‐
nents.
● Start-up of the delivered components is only permitted after the machine
or installation in which they are installed complies with the national
standards, safety instructions and application standards.
● Operation is only permitted if the national EMC standards for the appli‐
cation are met.
● The machine or installation manufacturer is responsible for compliance
with the limiting values as prescribed in national standards.
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
20/219
Safety Instructions for Electric Drives and Controls