REXROTH Fv Series, Instruction Manual

Page: 102 / 222

Large increase may cause high current leading to motor over heat
and may result in motor damage. Linear and square V/F curve
manual torque increase is shown in chapter "Group S0: V/F Con‐
trol" on page 97 and chapter "Group S0: V/F Control" on page 97 .
Fig.7-24: Lineare V/F curve manual torque increase
Fig.7-25: Square V/F curve manual torque increase
S0.09
Automatic voltage stabilization Factory default 0
Setting range
0: Not active
1: Always active
2: Not active during deceler‐
ation and braking
Minimum unit 1
Used to keep the output voltage constant within the output capability, when
the supply voltage is different than the rated voltage of the converter.
●
0: Not active
● 1: Always active
–
Select if brake resistor is in place or no quick deceleration is nec‐
essary.
● 2: Not active during deceleration and braking
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
100/219
Parameter Settings