REXROTH Fv Series, Instruction Manual

Page: 85 / 222

Type
Function
code
Name Setting range
Minimum
unit
Factory
default
Attribute
Fault
record
E4.10 Last fault 0: No fault record
1: Over current at constant speed (O.C.-1)
2: Over current during acceleration (O.C.-2)
3: Over current during deceleration (O.C.-3)
4: Over voltage at constant speed (O.C.-1)
5: Over voltage during acceleration (O.C.-2)
6: Over voltage during deceleration (O.C.-3)
7: Converter over load (O.L.-1)
8: Motor over load (O.L.-2)
9: CPU read/write fault (R.E.)
10: Operating panel read/write fault (KEY-)
11: External device fault (E.-St)
12: Communication fault (R.S.)
13: Circuit disconnection (C.F.)
14: Pulse encoder speed detection fault
(PULS)
15: Reserved
16: EMI fault (CPU-)
17: Short circuit (S.C.)
18: Reserved
19: L1, L2, L3 input phase loss (IPH.L)
20: U, V, W output phase loss (OPH.L)
21: Converter overheat (O.H.)
22: Parameter setting fault (PRSE)
23: Parameter auto-tuning fault (TUNE)
1 0 ◎
E4.11
2 nd last fault
1 0 ◎
E4.12
3 rd last fault
1 0 ◎
E4.13 Delete fault record
0: Inactive
1: Delete fault record
Note: The value is automatically set to 0 af‐
ter the operation.
1 0 ◆
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 83/219
Parameter Settings